Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)
Flojet - Spc8/2 No. 2 Pump (Imi Plate)

Flojet - SPC8/2 - No. 2 Pump (IMI PLATE)

€85.00
/
Shipping calculated at checkout.

Flojet: a Xylem Brand

 

HEIGHT MEASURMENTS (Check your cooler / Faulty Pump for Compatability)

 - ABOVE PLATE = allow for at least 60mm

 - BELOW PLATE = 150mm

 

Need a Hand? Let Us Install This Part For You:

https://brewcrew.ie/collections/service/products/cooler-technical-inspection

Disclaimer: We have a NO RETURNS policy on all cooler parts

PUMP0110S

Part No: 083903

Model: SPC8/2

Volts: 230v 1ph 50Hz 0.25A

 

Make sure to cross-reference the relevant measurements of your cooler/pump with the information below and in the images - to ensure that the FloJet SPC8/2 is right for you!

 

See Image 7 for some common examples of pumps we have swapped out in the past - Their Factory Specifications are as follows:

Top Row (left to right):

  • EBM - M2J042-DA07-19 (230v~ 50Hz 0.28A 38W) 

 - ABOVE PLATE = 75mm
 - BELOW PLATE = 145mm

  • SABER Type RIO-11 (230V 50HZ) Thermally Protected

 - ABOVE PLATE = 76mm
 - BELOW PLATE = 167mm

  • CORNELIUS P/N: 58-0420-603 (230V~ 50Hz) 2750 RPM 50 Watt

 - ABOVE PLATE = 86mm
 - BELOW PLATE = 148mm

 

Bottom Row (left to right)

  • MARCH MAY MM2T  (230-1-50Hz) / 230v 50Hz

 - ABOVE PLATE = 56mm
 - BELOW PLATE = 127mm

  • MICRO MOTORS MM1043/E - 38/01 - 202 688 (230V 50Hz) TYPE: 20442226

 - ABOVE PLATE = 63mm
 - BELOW PLATE = 155mm

  • MICRO MOTORS MM0714/H - 59 0410 - 181/6 (230V 50/60 Hz 40/98) TYPE No. 22332232

 - ABOVE PLATE = 54mm
 - BELOW PLATE = 145mm

 

Some Others Include:

  • FLOJET SPC12/4 - PT083969 - 30V 1ph 5Hz 0.4A 

 - ABOVE PLATE = 77mm
 - BELOW PLATE = 135mm

  • SABER S.R.L Pordenone - Type: CLT-2 - 230V 50Hz 1PH - 2550 RPM 0,23 AMP 28 Watt - Class. F IP00

 - ABOVE PLATE = 62mm
 - BELOW PLATE = 147mm

  • CelliType RIO-11 (230V 50HZ) Thermally Protected - 230v 50Hz 1PH-0,33AMPS 79 Watts 2780RPM 

 - ABOVE PLATE = 77mm
 - BELOW PLATE = 169mm

 

Flojet SPC8/2 Notes From The Manufacturer:

PRINCIPAL APPLICATIONS

Designed for continuous operation in, chillers, coolers, vending and general water applications

SPC pumps are fitted to python systems to provide the optimum cooling rate for soft drinks, beers and wines

WETTED MATERIALS

Stainless steel mounting plate • TPE Impeller • ABS Column/Pump Body • Stainless steel shaft • Nylon Agitator

FEATURES

Up to 8 litres/minute, Up to 2 metres head • Low maintenance and long life • Agitator propeller fitted as standard 

These terms apply to orders placed with The Brew Crew Ltd., Unit 58 KCR Industrial Estate, Kimmage, Dublin 12, D12 XN50, Ireland (company number 307025, VAT number IE6327025Q). Contact us on +353 1 440 1962 or at sales@brewcrew.ie.

Orders and payment
Prices are in euro and include 23% Irish VAT. Full payment is required in advance to confirm an order. We don't sell alcohol to anyone under 18. Delivery days and times chosen when ordering are a request; we'll contact you to confirm.

Delivery, returns and refunds
Our Shipping policy and Refund policy form part of these terms. They cover delivery charges, collection, keg and parts returns, gas cylinders, rental deposits and event cancellations. Nothing in these terms affects your statutory rights as a consumer.

Rental equipment
A fully refundable €200 rental deposit is taken on all rentals, by card. It covers damage, loss or an extended rental period. Standard rentals are for one weekend and are due back the Monday after; extensions are charged at 70% of the equipment rental charge per rollover. Christmas hire is booked as one extended period, with the dates shown on the Christmas booking page. You are responsible for the equipment while it's in your care.

Using beer dispense equipment
By buying or renting dispense equipment, you understand that:

  • You are responsible for making sure your gas and beer system is set up and balanced correctly, and is free of leaks.
  • You are responsible for technical mistakes you make with the equipment.
  • Keg dispense needs specialist equipment and some reading and learning. We're happy to advise.
  • You'll report any fault within 2 working days of purchase, and make every effort to return the item for inspection within 5 working days.
Back to Parts